Contact Us
TEL: 86-755-29603651
E-mail: Liu@bestc.com.cn
Address: 5th floor, Shabian Chengdong industry area, Gushu, Bao'an District, Shenzhen, China
Home > Knowledge > Content
Charger maintenance method
Sep 17, 2018


      Nowadays, the application of batteries is everywhere in our days. Therefore, chargers (such as MID chargers) have become indispensable figures in our days. However, we often encounter such questions. The charger is hot, the charger can't charge the battery, and the charger can't be used for a long time. Therefore, we need to protect the charger. So how do we care for the charger? Here are a few ways to refer to it:


     

      1, waterproof and moisture-proof. As an electronic product, accidental ingress of water or exposure to humid air for long periods of time can cause undesirable corrosion or oxidation of its internal electronic components.


      2, anti-drop and shockproof. The mobile phone charger is actually a weak component, and the internal components cannot withstand the beating. In particular, avoid accidentally landing during the application process. Do not throw, hit or sensation the charger. Rough handling of the charger can damage the internal board;


      3. Anti-strength chemical products. Do not use harsh chemicals, detergents or strong detergents to clean the charger. Remove the appearance of the charger and stain it with cotton and a small amount of absolute alcohol.


      4. Put static electricity during cleaning. Regularly clean the charger and charging interface. When finishing, use a damp cloth, perhaps an antistatic cloth. Never use a dry cloth (electrostatic charge)!


      5, anti-cold and heat. Do not place the charger in an area where the temperature is too high. High temperatures can shorten the life of an electronic device, destroy the charger, and deform or melt some plastic parts. Also do not store the charger in a cold area. When the charger is operating in a cold environment, when the internal temperature rises, the charger will form moisture and damage the circuit board.

Previous: There are three control principles for switching power supplies

Next: Power adapter and switching power supply details