Contact Us
TEL: 86-755-29603651
E-mail: Liu@bestc.com.cn
Address: 5th floor, Shabian Chengdong industry area, Gushu, Bao'an District, Shenzhen, China
Home > Knowledge > Content
Five Quick Charge Methods for Chargers
Mar 31, 2018

In order to maximize the speed of the chemical reaction of the battery, the time for the rechargeable battery to reach the full charge state is shortened, and at the same time, the polarization of the positive and negative plates of the battery is ensured to be as little as possible or light, and the efficiency of the use of the battery is improved. Adapter rapid charging technology has been rapidly developed in recent years.


(1) pulse-type charging method, pulse charging method First, the pulse current is used to charge the battery, and then let the battery stop charging for a period of time, so that the cycle of intermittent pulse makes the battery have a more full response time, reducing the amount of gas, improve the battery's Charging current acceptance rate.


(2) Variable voltage variable current wave type intermittent positive and negative zero pulse rapid charge method, which integrates the advantages of pulse charging method, REFLEXTM rapid charging method, variable current intermittent charging method and variable voltage intermittent charging method, and can be realized in a short time Filling in more power and improving the battery's charge acceptance capability, it has been developed as a fast charging method.


(3) REFLEXTM rapid charging method, this technology is a patented technology in the United States, and its main object of charging is a nickel-tin battery. Because it uses a new type of charging method, it greatly reduces the time for rapid battery charging.


(4) The variable voltage intermittent charging method differs from the variable current intermittent charging method in that the first stage is not intermittent constant current but intermittent constant pressure. In each constant voltage charging stage, since it is a constant voltage charging, the charging current naturally decreases according to an exponential law, which is in accordance with the feature that the acceptable rate of the battery current gradually declines as the charging progresses.


(5) Variable current intermittent charging method. This charging method is based on constant current charging and pulse charging. Its characteristic is to change the constant current charging section into a limited voltage and variable current intermittent charging section. Each section of the pre-charge stage uses a variable-current intermittent charging method to ensure that the charging current is increased and most of the charging capacity is obtained. After the charging, the constant voltage charging section is used to obtain the overcharged amount, and the design of the smart battery charger for restoring the battery to the single-chip microcomputer is restored to the completely charged state.


Previous: Basic knowledge of mobile phone charger

Next: What are the considerations when choosing a good car charger?